Visioscope® Palm VP 25
Quick and easy tool for skin type analysis, sun and hair care products which includes images of the result. Battery operated probe design for easy transport and immediately ready to use.

Shows the structure of the skin and the deeper levels of the skin (pigmentation, blood vessels)
Analysis of skin type (includes high resolution images)
  • Dry skin
  • Pigmentation/spots
  • Skin aging/sun damage
  • Fine lines and wrinkles
  • Pores
  • Impurities (redness, acne, comedones)
Promotion tool for sun and hair care products
  • Offers close look of hair structure, dandruff and condition of the scalp

Dimensions: 202 mm length, largest Ø 41 mm

Illumination: 2 x 6 white LEDs, special polarization filters

Area of view: 5.2 x 4.4 mm (corresponds to a zoom of approx. 13 x)


Power supply: via monitor unit


          Dimensions: 152 x 80 x 25 mm,

          Weight: including battery and camera: 400 g

          Type: 3.5" QVGA

           Resolution: 240 x 320 Pixel

           Illumination: LED (approx 1000 h lifetime)

           Powered by: Lithium-Ion rechargeable battery (1S2P CGA-103450A), 3.6
V/3900 mAh, nominal energy: 14.4 Wh, Rechargeable: with the supplied power
supply or by USB at a computer

           Power supply: Input: 90-264 V AC, 47-63 Hz,0.5 A (max.), Output: 5-7
V, 10 W max.

           Dimensions: 78 x 42 x 30 mm (without adapter), weight: approx. 150 g


The SPA 99 is light, portable, battery operated, flexible and easy to handle. The recommended instrument for advising on sun care and skin whitening products.

Measurement and analysis of pigmentation level (melanin) and erythema level (redness) of the skin.
Assessment of the risk on skin irritation before laser treatment.

Power Supply: battery operated (9 V)

Dimensions: 15 x 14 x 4.5 cm

Weight: 0.5 kg

Measurement Principle: absorption/reflection


The Multi Probe Adapter System is modular. It consists of a basic device and the probes. The user chooses a basic device meeting his requirements. The probes are digital and all calibration data are inside and therefore they can be connected to any of them.

Ideal instrument for the Research and Development of raw materials, cosmetics, skin care, household and pharmaceutical products.
Testing device for efficacy testing and claim support.
Dermatological basis for research.
All kinds of scientific studies, as well as field tests.

Corneometer® CM 825: Skin Surface Hydration

Sebumeter® SM 815: Sebum on the Skin Surface

Skin-pH-Meter PH 905: pH-Measurement

Mexameter® MX 18: Melanin & Erythema

Tewameter® TM 300 and Triple TM 330T  and In-vitro Tewameter® VT 310: Transepidermal Waterloss (TEWL)

Cutometer® MPA 580: Viscoelasticity by Suction

Skin-Thermo-Meter ST 500: Skin Temperature

Reviscometer® RVM 600: Skin Ageing & Anisotropy (under reconstruction)

Skin Glossymeter GL 200: Skin and hair gloss appearance

Skin-Colorimeter CL 400: Colour of skin and hair

Frictiometer FR 700: Friction measurements on the skin

Ambient condition sensor RHT 100: recording the ambient conditions (r.H and temperature) constantly during the measurement


Dimensions: 27.0 x 14.5 x 7.6 cm

Weight: 1.6 kg

Interface: USB 2.0, type B connector

Power supply: external 100-240 VAC, 47-63 Hz, DC 12V/4A

Computer: Windows® 7/8/10, performance must meet system requirements, USB 2.0/3.0

The MPA system is operated with an overall C+K software.


Measurements of skin hydration, oil, elasticity and pigmentation (to recommend sunscreens).

Measurement of skin hydration.
Oil/sebum content assessment on hair and skin.
Measurement of the elasticity of the skin.
Measurement of skin pigmentation and the recommendation of the suitable sun protection factor (SPF) for sun exposure.

Dimensions: 37 x 28 x 22 cm

Weight: approx. 2.7 kg (without probes)

External Power Supply: 100-240 VAC/12VDC,



Measurement: capacitance

Time: 1 s, Scale 0-99

Frequency: 0.9-1.2 MHz

Dimension: 11 cm

Weight: 41 g

Cable length: 1.3 m



Measurement: photometrical

Time: 10 s

Scale: 0-99

Dimensions: 8.5 x 11.3 x 2.3 cm

Weight: 65 g

Number of Measurement: approx. 400 (if the trigger is only pulled down slowly for the next free measuring section). when tape is consumed, the whole cartridge has to be renewed



Measurement: suction with 400 mbar pressure

Time: 6 s (3 s suction and 3 s relaxation)

Scale: 0-99

Probe Opening: 2 mm Ø

Dimensions: 13 cm x Ø 2.4 cm

Weight: 95 g

Cable Length: 1.3 m



Measurement: absorption/reflection

Wave lengths: 568, 660 and 880 nm

Time: 1 s

Scale: 0-99

Dimensions: 13 cm x Ø 2.4 cm

Weight: 85 g

Cable Length: 1.3 m


Visioscope® AP 35 Analogue Skin Camera:

Power Supply: 5 V DC (via main device)

Dimensions: 12 x 5.5 x 5.5 cm

Weight: 220 g

Cable Length: approx. 1.5 m

Light Source: White LED →multi function camera button switches the polarization mode (short press) and freezes the image (long press)

Image Size : 6 x 8 mm → approx. 10 mm diagonal

Video Output Mode: PAL


Dimensions: approx. 17 x 17 x 18. 6" → approx 144 mm diagonal → 14.4 x zoom

Sebufix® F 16: Milky foil to determine the sebum content qualitatively

Dimensions: 1.7 x 1.7 cm

Thickness: 0.2 mm

Corneofix® F 20: Transparent foil to assess desquamation

Dimensions: 2.00 x 1.95 cm

Thickness: 0.1 mm

Foils are completely harmless for the skin

Technical changes may be made without prior notice.


The VisioFace® RD and its software have been developed to take highest resolution full face photos under standardized conditions for the documentation of treatments and studies. It is focused on simple organisation of the photos and detailed comparisons.

Ideal device for:
Treatment documentation
Performing efficacy studies
Image comparison over a long period
Removable head and chin rest allowing exact positioning frontally or sidewise.
Reproducible positioning of the face: overlays (ghost images) of previous images of the person and drawing of marks on interesting parts are possible.
A colour chart is photographed with each face to make photos comparable over time and ambient light conditions.

Dimensions: 54 x 50 x 44 cm

Weight: approx. 12 kg

Illumination: 210 white LEDs

Camera: Canon EOS 550D, 18 Mpx, sensor CMOS, autofocus, images can be saved as jpg (recommended) or png,

Objective: EF 20 mm/2.8

USM: focal length 20 mm, filter diameter 72 mm, focus by ultrasound

Power Supply: external 100-250 V, 47-63 Hz, DC 12V/4A

Port: USB

Computer: Windows®7, 8 or 10, performance must meet system requirements, USB 2.0, 3.0

Technical changes may be made without prior notice.